QMetaType Class Reference
|
Constant | Value | Description |
---|---|---|
QMetaType::Void | 0 | void |
QMetaType::Bool | 1 | bool |
QMetaType::Int | 2 | int |
QMetaType::UInt | 3 | unsigned int |
QMetaType::Double | 6 | double |
QMetaType::QChar | 7 | QChar |
QMetaType::QString | 10 | QString |
QMetaType::QByteArray | 12 | QByteArray |
QMetaType::VoidStar | 128 | void * |
QMetaType::Long | 129 | long |
QMetaType::LongLong | 4 | LongLong |
QMetaType::Short | 130 | short |
QMetaType::Char | 131 | char |
QMetaType::ULong | 132 | unsigned long |
QMetaType::ULongLong | 5 | ULongLong |
QMetaType::UShort | 133 | unsigned short |
QMetaType::UChar | 134 | unsigned char |
QMetaType::Float | 135 | float |
QMetaType::QObjectStar | 136 | QObject * |
QMetaType::QWidgetStar | 137 | QWidget * |
QMetaType::QColorGroup | 63 | QColorGroup |
QMetaType::QCursor | 74 | QCursor |
QMetaType::QDate | 14 | QDate |
QMetaType::QSize | 21 | QSize |
QMetaType::QTime | 15 | QTime |
QMetaType::QVariantList | 9 | QVariantList |
QMetaType::QPolygon | 71 | QPolygon |
QMetaType::QColor | 67 | QColor |
QMetaType::QSizeF | 22 | QSizeF |
QMetaType::QRectF | 20 | QRectF |
QMetaType::QLine | 23 | QLine |
QMetaType::QTextLength | 78 | QTextLength |
QMetaType::QStringList | 11 | QStringList |
QMetaType::QVariantMap | 8 | QVariantMap |
QMetaType::QIcon | 69 | QIcon |
QMetaType::QPen | 77 | QPen |
QMetaType::QLineF | 24 | QLineF |
QMetaType::QTextFormat | 79 | QTextFormat |
QMetaType::QRect | 19 | QRect |
QMetaType::QPoint | 25 | QPoint |
QMetaType::QUrl | 17 | QUrl |
QMetaType::QRegExp | 27 | QRegExp |
QMetaType::QDateTime | 16 | QDateTime |
QMetaType::QPointF | 26 | QPointF |
QMetaType::QPalette | 68 | QPalette |
QMetaType::QFont | 64 | QFont |
QMetaType::QBrush | 66 | QBrush |
QMetaType::QRegion | 72 | QRegion |
QMetaType::QBitArray | 13 | QBitArray |
QMetaType::QImage | 70 | QImage |
QMetaType::QKeySequence | 76 | QKeySequence |
QMetaType::QSizePolicy | 75 | QSizePolicy |
QMetaType::QPixmap | 65 | QPixmap |
QMetaType::QLocale | 18 | QLocale |
QMetaType::QBitmap | 73 | QBitmap |
QMetaType::QMatrix | 80 | QMatrix |
QMetaType::QTransform | 81 | QTransform |
QMetaType::User | 256 | Base value for user types |
Additional types can be registered using Q_DECLARE_METATYPE().
See also type() and typeName().
Returns a copy of copy, assuming it is of type type. If copy is zero, creates a default type.
See also destroy(), isRegistered(), and Type.
Destroys the data, assuming it is of the type given.
See also construct(), isRegistered(), and Type.
Returns true if the datatype with ID type is registered; otherwise returns false.
See also type(), typeName(), and Type.
Reads the object of the specified type from the given stream into data. Returns true if the object is loaded successfully; otherwise returns false.
The type must have been registered with qRegisterMetaType() and qRegisterMetaTypeStreamOperators() beforehand.
Normally, you should not need to call this function directly. Instead, use QVariant's operator>>(), which relies on load() to stream custom types.
See also save() and qRegisterMetaTypeStreamOperators().
Writes the object pointed to by data with the ID type to the given stream. Returns true if the object is saved successfully; otherwise returns false.
The type must have been registered with qRegisterMetaType() and qRegisterMetaTypeStreamOperators() beforehand.
Normally, you should not need to call this function directly. Instead, use QVariant's operator<<(), which relies on save() to stream custom types.
See also load() and qRegisterMetaTypeStreamOperators().
Returns a handle to the type called typeName, or 0 if there is no such type.
See also isRegistered(), typeName(), and Type.
Returns the type name associated with the given type, or 0 if no matching type was found. The returned pointer must not be deleted.
See also type(), isRegistered(), and Type.
Unregisters a user type, with typeName.
This function was introduced in Qt 4.4.
See also type() and typeName().
Returns the meta type id of type T at compile time. If the type was not declared with Q_DECLARE_METATYPE(), compilation will fail.
Typical usage:
int id = qMetaTypeId<QString>(); // id is now QMetaType::QString id = qMetaTypeId<MyStruct>(); // compile error if MyStruct not declared
QMetaType::type() returns the same ID as qMetaTypeId(), but does a lookup at runtime based on the name of the type. QMetaType::type() is a bit slower, but compilation succeeds if a type is not registered.
Note: This function is thread-safe.
This function was introduced in Qt 4.1.
See also Q_DECLARE_METATYPE() and QMetaType::type().
Registers the type name typeName to the type T. Returns the internal ID used by QMetaType. Any class or struct that has a public constructor, a public copy constructor, and a public destructor can be registered.
After a type has been registered, you can create and destroy objects of that type dynamically at run-time.
This example registers the class MyClass:
qRegisterMetaType<MyClass>("MyClass");
Note: This function is thread-safe.
See also qRegisterMetaTypeStreamOperators(), QMetaType::isRegistered(), and Q_DECLARE_METATYPE().
This is an overloaded member function, provided for convenience.
Call this function to register the type T. T must be declared with Q_DECLARE_METATYPE(). Returns the meta type Id.
Example:
int id = qRegisterMetaType<MyStruct>();
To use the type T in QVariant, using Q_DECLARE_METATYPE() is sufficient. To use the type T in queued signal and slot connections, qRegisterMetaType<T>() must be called before the first connection is established.
Also, to use type T with the QObject::property() API, qRegisterMetaType<T>() must be called before it is used, typically in the constructor of the class that uses T, or in the main() function.
Note: This function is thread-safe.
This function was introduced in Qt 4.2.
See also Q_DECLARE_METATYPE().
Registers the stream operators for the type T called typeName.
Afterward, the type can be streamed using QMetaType::load() and QMetaType::save(). These functions are used when streaming a QVariant.
qRegisterMetaTypeStreamOperators<MyClass>("MyClass");
The stream operators should have the following signatures:
QDataStream &operator<<(QDataStream &out, const MyClass &myObj); QDataStream &operator>>(QDataStream &in, MyClass &myObj);
Note: This function is thread-safe.
See also qRegisterMetaType(), QMetaType::isRegistered(), and Q_DECLARE_METATYPE().
This macro makes the type Type known to QMetaType. It is needed to use the type Type as a custom type in QVariant.
Ideally, this macro should be placed below the declaration of the class or struct. If that is not possible, it can be put in a private header file which has to be included every time that type is used in a QVariant.
Adding a Q_DECLARE_METATYPE() makes the type known to all template based functions, including QVariant. Note that if you intend to use the type in queued signal and slot connections, you also have to call qRegisterMetaType() since such connections are resolved at runtime.
This example shows a typical use case of Q_DECLARE_METATYPE():
struct MyStruct { int i; ... }; Q_DECLARE_METATYPE(MyStruct)
If MyStruct is in a namespace, the Q_DECLARE_METATYPE() macro has to be outside the namespace:
namespace MyNamespace { ... } Q_DECLARE_METATYPE(MyNamespace::MyStruct)
Since MyStruct is now known to QMetaType, it can be used in QVariant:
MyStruct s; QVariant var; var.setValue(s); // copy s into the variant ... // retrieve the value MyStruct s2 = var.value<MyStruct>();
See also qRegisterMetaType().
Copyright © 2008 Nokia | Trademarks | Qt 4.4.3 |
Попытка перевода Qt документации. Если есть желание присоединиться, или если есть замечания или пожелания, то заходите на форум: Перевод Qt документации на русский язык... Люди внесшие вклад в перевод: Команда переводчиков |