QPrinter Class Reference
|
enum | ColorMode { Color, GrayScale } |
enum | DuplexMode { DuplexNone, DuplexAuto, DuplexLongSide, DuplexShortSide } |
enum | Orientation { Portrait, Landscape } |
enum | OutputFormat { NativeFormat, PdfFormat, PostScriptFormat } |
enum | PageOrder { FirstPageFirst, LastPageFirst } |
enum | PaperSize { A0, A1, A2, A3, ..., Custom } |
enum | PaperSource { Auto, Cassette, Envelope, EnvelopeManual, ..., SmallFormat } |
enum | PrintRange { AllPages, Selection, PageRange } |
enum | PrinterMode { ScreenResolution, PrinterResolution, HighResolution } |
enum | PrinterState { Idle, Active, Aborted, Error } |
enum | Unit { Millimeter, Point, Inch, Pica, ..., DevicePixel } |
QPrinter ( PrinterMode mode = ScreenResolution ) | |
QPrinter ( const QPrinterInfo & printer, PrinterMode mode = ScreenResolution ) | |
~QPrinter () | |
bool | abort () |
int | actualNumCopies () const |
bool | collateCopies () const |
ColorMode | colorMode () const |
QString | creator () const |
QString | docName () const |
bool | doubleSidedPrinting () const |
DuplexMode | duplex () const |
bool | fontEmbeddingEnabled () const |
int | fromPage () const |
bool | fullPage () const |
void | getPageMargins ( qreal * left, qreal * top, qreal * right, qreal * bottom, Unit unit ) const |
bool | isValid () const |
bool | newPage () |
int | numCopies () const |
Orientation | orientation () const |
QString | outputFileName () const |
OutputFormat | outputFormat () const |
PageOrder | pageOrder () const |
QRect | pageRect () const |
QRectF | pageRect ( Unit unit ) const |
QRect | paperRect () const |
QRectF | paperRect ( Unit unit ) const |
PaperSize | paperSize () const |
QSizeF | paperSize ( Unit unit ) const |
PaperSource | paperSource () const |
QPrintEngine * | printEngine () const |
QString | printProgram () const |
PrintRange | printRange () const |
QString | printerName () const |
QString | printerSelectionOption () const |
PrinterState | printerState () const |
int | resolution () const |
void | setCollateCopies ( bool collate ) |
void | setColorMode ( ColorMode newColorMode ) |
void | setCreator ( const QString & creator ) |
void | setDocName ( const QString & name ) |
void | setDoubleSidedPrinting ( bool doubleSided ) |
void | setDuplex ( DuplexMode duplex ) |
void | setFontEmbeddingEnabled ( bool enable ) |
void | setFromTo ( int from, int to ) |
void | setFullPage ( bool fp ) |
void | setNumCopies ( int numCopies ) |
void | setOrientation ( Orientation orientation ) |
void | setOutputFileName ( const QString & fileName ) |
void | setOutputFormat ( OutputFormat format ) |
void | setPageMargins ( qreal left, qreal top, qreal right, qreal bottom, Unit unit ) |
void | setPageOrder ( PageOrder pageOrder ) |
void | setPaperSize ( PaperSize newPaperSize ) |
void | setPaperSize ( const QSizeF & paperSize, Unit unit ) |
void | setPaperSource ( PaperSource source ) |
void | setPrintProgram ( const QString & printProg ) |
void | setPrintRange ( PrintRange range ) |
void | setPrinterName ( const QString & name ) |
void | setPrinterSelectionOption ( const QString & option ) |
void | setResolution ( int dpi ) |
void | setWinPageSize ( int pageSize ) |
QList<PaperSource> | supportedPaperSources () const |
QList<int> | supportedResolutions () const |
int | toPage () const |
int | winPageSize () const |
virtual QPaintEngine * | paintEngine () const |
void | setEngines ( QPrintEngine * printEngine, QPaintEngine * paintEngine ) |
The QPrinter class is a paint device that paints on a printer.
This device represents a series of pages of printed output, and is used in almost exactly the same way as other paint devices such as QWidget and QPixmap. A set of additional functions are provided to manage device-specific features, such as orientation and resolution, and to step through the pages in a document as it is generated.
When printing directly to a printer on Windows or Mac OS X, QPrinter uses the built-in printer drivers. On X11, QPrinter uses the Common Unix Printing System (CUPS) or the standard Unix lpr utility to send PostScript or PDF output to the printer. As an alternative, the printProgram() function can be used to specify the command or utility to use instead of the system default.
Note that setting parameters like paper size and resolution on an invalid printer is undefined. You can use QPrinter::isValid() to verify this before changing any parameters.
QPrinter supports a number of parameters, most of which can be changed by the end user through a print dialog. In general, QPrinter passes these functions onto the underlying QPrintEngine.
The most important parameters are:
Many of these functions can only be called before the actual printing begins (i.e., before QPainter::begin() is called). This usually makes sense because, for example, it's not possible to change the number of copies when you are halfway through printing. There are also some settings that the user sets (through the printer dialog) and that applications are expected to obey. See QAbstractPrintDialog's documentation for more details.
When QPainter::begin() is called, the QPrinter it operates on is prepared for a new page, enabling the QPainter to be used immediately to paint the first page in a document. Once the first page has been painted, newPage() can be called to request a new blank page to paint on, or QPainter::end() can be called to finish printing. The second page and all following pages are prepared using a call to newPage() before they are painted.
The first page in a document does not need to be preceded by a call to newPage(). You only need to calling newPage() after QPainter::begin() if you need to insert a blank page at the beginning of a printed document. Similarly, calling newPage() after the last page in a document is painted will result in a trailing blank page appended to the end of the printed document.
If you want to abort the print job, abort() will try its best to stop printing. It may cancel the entire job or just part of it.
Since QPrinter can print to any QPrintEngine subclass, it is possible to extend printing support to cover new types of printing subsystem by subclassing QPrintEngine and reimplementing its interface.
See also QPrintDialog and Printing with Qt.
This enum type is used to indicate whether QPrinter should print in color or not.
Константа | Значение | Описание |
---|---|---|
QPrinter::Color | 1 | print in color if available, otherwise in grayscale. |
QPrinter::GrayScale | 0 | print in grayscale, even on color printers. |
This enum is used to indicate whether printing will occur on one or both sides of each sheet of paper (simplex or duplex printing).
Константа | Значение | Описание |
---|---|---|
QPrinter::DuplexNone | 0 | Single sided (simplex) printing only. |
QPrinter::DuplexAuto | 1 | The printer's default setting is used to determine whether duplex printing is used. |
QPrinter::DuplexLongSide | 2 | Both sides of each sheet of paper are used for printing. The paper is turned over its longest edge before the second side is printed |
QPrinter::DuplexShortSide | 3 | Both sides of each sheet of paper are used for printing. The paper is turned over its shortest edge before the second side is printed |
Данное перечисление было введено в Qt 4.4.
This enum type (not to be confused with Orientation) is used to specify each page's orientation.
Константа | Значение | Описание |
---|---|---|
QPrinter::Portrait | 0 | the page's height is greater than its width. |
QPrinter::Landscape | 1 | the page's width is greater than its height. |
This type interacts with QPrinter::PaperSize and QPrinter::setFullPage() to determine the final size of the page available to the application.
The OutputFormat enum is used to describe the format QPrinter should use for printing.
Константа | Значение | Описание |
---|---|---|
QPrinter::NativeFormat | 0 | QPrinter will print output using a method defined by the platform it is running on. This mode is the default when printing directly to a printer. |
QPrinter::PdfFormat | 1 | QPrinter will generate its output as a searchable PDF file. This mode is the default when printing to a file. |
QPrinter::PostScriptFormat | 2 | QPrinter will generate its output as in the PostScript format. (This feature was introduced in Qt 4.2.) |
See also outputFormat(), setOutputFormat(), and setOutputFileName().
This enum type is used by QPrinter to tell the application program how to print.
Константа | Значение | Описание |
---|---|---|
QPrinter::FirstPageFirst | 0 | the lowest-numbered page should be printed first. |
QPrinter::LastPageFirst | 1 | the highest-numbered page should be printed first. |
This enum type specifies what paper size QPrinter should use. QPrinter does not check that the paper size is available; it just uses this information, together with QPrinter::Orientation and QPrinter::setFullPage(), to determine the printable area.
The defined sizes (with setFullPage(true)) are:
Константа | Значение | Описание |
---|---|---|
QPrinter::A0 | 5 | 841 x 1189 мм |
QPrinter::A1 | 6 | 594 x 841 мм |
QPrinter::A2 | 7 | 420 x 594 мм |
QPrinter::A3 | 8 | 297 x 420 мм |
QPrinter::A4 | 0 | 210 x 297 мм, 8.26 x 11.69 дюймов |
QPrinter::A5 | 9 | 148 x 210 м |
QPrinter::A6 | 10 | 105 x 148 мм |
QPrinter::A7 | 11 | 74 x 105 мм |
QPrinter::A8 | 12 | 52 x 74 мм |
QPrinter::A9 | 13 | 37 x 52 мм |
QPrinter::B0 | 14 | 1000 x 1414 mm |
QPrinter::B1 | 15 | 707 x 1000 mm |
QPrinter::B2 | 17 | 500 x 707 mm |
QPrinter::B3 | 18 | 353 x 500 mm |
QPrinter::B4 | 19 | 250 x 353 mm |
QPrinter::B5 | 1 | 176 x 250 mm, 6.93 x 9.84 inches |
QPrinter::B6 | 20 | 125 x 176 mm |
QPrinter::B7 | 21 | 88 x 125 mm |
QPrinter::B8 | 22 | 62 x 88 mm |
QPrinter::B9 | 23 | 33 x 62 mm |
QPrinter::B10 | 16 | 31 x 44 mm |
QPrinter::C5E | 24 | 163 x 229 мм |
QPrinter::Comm10E | 25 | 105 x 241 мм, U.S. Common 10 Envelope |
QPrinter::DLE | 26 | 110 x 220 мм |
QPrinter::Executive | 4 | 7.5 x 10 inches, 190.5 x 254 mm |
QPrinter::Folio | 27 | 210 x 330 мм |
QPrinter::Ledger | 28 | 431.8 x 279.4 mm |
QPrinter::Legal | 3 | 8.5 x 14 inches, 215.9 x 355.6 mm |
QPrinter::Letter | 2 | 8.5 x 11 inches, 215.9 x 279.4 mm |
QPrinter::Tabloid | 29 | 279.4 x 431.8 mm |
QPrinter::Custom | 30 | Неизвестно или определяемый пользователем размер. |
With setFullPage(false) (the default), the metrics will be a bit smaller; how much depends on the printer in use.
Данное перечисление было введено в Qt 4.4.
This enum type specifies what paper source QPrinter is to use. QPrinter does not check that the paper source is available; it just uses this information to try and set the paper source. Whether it will set the paper source depends on whether the printer has that particular source.
Warning: This is currently only implemented for Windows.
Константа | Значение |
---|---|
QPrinter::Auto | 6 |
QPrinter::Cassette | 11 |
QPrinter::Envelope | 4 |
QPrinter::EnvelopeManual | 5 |
QPrinter::FormSource | 12 |
QPrinter::LargeCapacity | 10 |
QPrinter::LargeFormat | 9 |
QPrinter::Lower | 1 |
QPrinter::MaxPageSource | 13 |
QPrinter::Middle | 2 |
QPrinter::Manual | 3 |
QPrinter::OnlyOne | 0 |
QPrinter::Tractor | 7 |
QPrinter::SmallFormat | 8 |
Used to specify the print range selection option.
Константа | Значение | Описание |
---|---|---|
QPrinter::AllPages | 0 | All pages should be printed. |
QPrinter::Selection | 1 | Only the selection should be printed. |
QPrinter::PageRange | 2 | The specified page range should be printed. |
See also QAbstractPrintDialog::PrintRange.
This enum describes the mode the printer should work in. It basically presets a certain resolution and working mode.
Константа | Значение | Описание |
---|---|---|
QPrinter::ScreenResolution | 0 | Sets the resolution of the print device to the screen resolution. This has the big advantage that the results obtained when painting on the printer will match more or less exactly the visible output on the screen. It is the easiest to use, as font metrics on the screen and on the printer are the same. This is the default value. ScreenResolution will produce a lower quality output than HighResolution and should only be used for drafts. |
QPrinter::PrinterResolution | 1 | This value is deprecated. Is is equivalent to ScreenResolution on Unix and HighResolution on Windows and Mac. Due do the difference between ScreenResolution and HighResolution, use of this value may lead to non-portable printer code. |
QPrinter::HighResolution | 2 | On Windows, sets the printer resolution to that defined for the printer in use. For PostScript printing, sets the resolution of the PostScript driver to 1200 dpi. |
Note: When rendering text on a QPrinter device, it is important to realize that the size of text, when specified in points, is independent of the resolution specified for the device itself. Therefore, it may be useful to specify the font size in pixels when combining text with graphics to ensure that their relative sizes are what you expect.
Константа | Значение |
---|---|
QPrinter::Idle | 0 |
QPrinter::Active | 1 |
QPrinter::Aborted | 2 |
QPrinter::Error | 3 |
This enum type is used to specify the measurement unit for page and paper sizes.
Константа | Значение |
---|---|
QPrinter::Millimeter | 0 |
QPrinter::Point | 1 |
QPrinter::Inch | 2 |
QPrinter::Pica | 3 |
QPrinter::Didot | 4 |
QPrinter::Cicero | 5 |
QPrinter::DevicePixel | 6 |
Note the difference between Point and DevicePixel. The Point unit is defined to be 1/72th of an inch, while the DevicePixel unit is resolution dependant and is based on the actual pixels, or dots, on the printer.
Данное перечисление было введено в Qt 4.4.
Creates a new printer object with the given mode.
Creates a new printer object with the given printer and mode.
Эта функция была введена в Qt 4.4.
Destroys the printer object and frees any allocated resources. If the printer is destroyed while a print job is in progress this may or may not affect the print job.
Aborts the current print run. Returns true if the print run was successfully aborted and printerState() will return QPrinter::Aborted; otherwise returns false.
It is not always possible to abort a print job. For example, all the data has gone to the printer but the printer cannot or will not cancel the job when asked to.
Возвращает количество копий, которые будут напечатаны. Значение по умолчанию равно 1.
Эта функция всегда возвращает фактическое значение, указанное в диалоге печати или используя setNumCopies().
Эта функция была введена в Qt 4.6.
Смотрите также setNumCopies() и numCopies().
Returns true if collation is turned on when multiple copies is selected. Returns false if it is turned off when multiple copies is selected. When collating is turned off the printing of each individual page will be repeated the numCopies() amount before the next page is started. With collating turned on all pages are printed before the next copy of those pages is started.
Эта функция была введена в Qt 4.1.
See also setCollateCopies().
Returns the current color mode.
Смотрите также setColorMode().
Returns the name of the application that created the document.
See also setCreator().
Returns the document name.
See also setDocName() and QPrintEngine::PrintEnginePropertyKey.
Returns true if double side printing is enabled.
Currently this option is only supported on X11.
Эта функция была введена в Qt 4.2.
See also setDoubleSidedPrinting().
Returns the current duplex mode.
Currently this option is only supported on X11.
Эта функция была введена в Qt 4.4.
See also setDuplex().
Returns true if font embedding is enabled.
Currently this option is only supported on X11.
Эта функция была введена в Qt 4.1.
See also setFontEmbeddingEnabled().
Returns the number of the first page in a range of pages to be printed (the "from page" setting). Pages in a document are numbered according to the convention that the first page is page 1.
By default, this function returns a special value of 0, meaning that the "from page" setting is unset.
Note: If fromPage() and toPage() both return 0, this indicates that the whole document will be printed.
Эта функция была введена в Qt 4.1.
See also setFromTo() and toPage().
Returns true if the origin of the printer's coordinate system is at the corner of the page and false if it is at the edge of the printable area.
See setFullPage() for details and caveats.
See also setFullPage() and PaperSize.
Returns the page margins for this printer in left, top, right, bottom. The unit of the returned margins are specified with the unit parameter.
Эта функция была введена в Qt 4.4.
Returns true if the printer currently selected is a valid printer in the system, or a pure PDF/PostScript printer; otherwise returns false.
To detect other failures check the output of QPainter::begin() or QPrinter::newPage().
QPrinter printer;
printer.setOutputFormat(QPrinter::PdfFormat);
printer.setOutputFileName("/foobar/nonwritable.pdf");
QPainter painter;
if (! painter.begin(&printer)) { // failed to open file
qWarning("failed to open file, is it writable?");
return 1;
}
painter.drawText(10, 10, "Test");
if (! printer.newPage()) {
qWarning("failed in flushing page to disk, disk full?");
return 1;
}
painter.drawText(10, 10, "Test 2");
painter.end();
Эта функция была введена в Qt 4.4.
See also setPrinterName().
Tells the printer to eject the current page and to continue printing on a new page. Returns true if this was successful; otherwise returns false.
Calling newPage() on an inactive QPrinter object will always fail.
Возвращает количество копий, которые будут напечатаны. Значение по умолчанию равно 1.
В Windows, Mac OS X и X11, поддерживающих CUPS, всегда будет возвращено 1 так как внутри эти операционные системы могут обрабатывать некоторое количество копий.
В X11 будет возвращено значение количества экземпляров, которое необходимо напечатать приложению для того чтобы совпасть с числом, заданным в диалоге настройки печати. Это выполнимо поскольку некоторые драйверы принтеров не способны поместить копии в буфер и в этих случаях приложение должно выполнить явный вызов кода печати для каждой копии.
Смотрите также setNumCopies() и actualNumCopies().
Returns the orientation setting. This is driver-dependent, but is usually QPrinter::Portrait.
Смотрите также setOrientation().
Returns the name of the output file. By default, this is an empty string (indicating that the printer shouldn't print to file).
See also setOutputFileName() and QPrintEngine::PrintEnginePropertyKey.
Returns the output format for this printer.
Эта функция была введена в Qt 4.1.
See also setOutputFormat().
Returns the current page order.
The default page order is FirstPageFirst.
See also setPageOrder().
Returns the page's rectangle; this is usually smaller than the paperRect() since the page normally has margins between its borders and the paper.
The unit of the returned rectangle is DevicePixel.
See also paperSize().
Returns the page's rectangle in unit; this is usually smaller than the paperRect() since the page normally has margins between its borders and the paper.
Эта функция была введена в Qt 4.4.
See also paperSize().
Reimplemented from QPaintDevice::paintEngine().
Returns the paint engine used by the printer.
Returns the paper's rectangle; this is usually larger than the pageRect().
The unit of the returned rectangle is DevicePixel.
See also pageRect().
Returns the paper's rectangle in unit; this is usually larger than the pageRect().
Эта функция была введена в Qt 4.4.
See also pageRect().
Returns the printer paper size. Значение по умолчанию зависит от драйвера.
Эта функция была введена в Qt 4.4.
See also setPaperSize(), pageRect(), and paperRect().
Returns the paper size in unit.
Эта функция была введена в Qt 4.4.
See also setPaperSize().
Returns the printer's paper source. This is Manual or a printer tray or paper cassette.
See also setPaperSource().
Returns the print engine used by the printer.
Эта функция была введена в Qt 4.1.
Returns the name of the program that sends the print output to the printer.
The default is to return an empty string; meaning that QPrinter will try to be smart in a system-dependent way. On X11 only, you can set it to something different to use a specific print program. On the other platforms, this returns an empty string.
See also setPrintProgram() and setPrinterSelectionOption().
Returns the page range of the QPrinter. After the print setup dialog has been opened, this function returns the value selected by the user.
Эта функция была введена в Qt 4.1.
Смотрите также setPrintRange().
Returns the printer name. This value is initially set to the name of the default printer.
See also setPrinterName().
Returns the printer options selection string. This is useful only if the print command has been explicitly set.
The default value (an empty string) implies that the printer should be selected in a system-dependent manner.
Any other value implies that the given value should be used.
Warning: This function is not available on Windows.
See also setPrinterSelectionOption().
Returns the current state of the printer. This may not always be accurate (for example if the printer doesn't have the capability of reporting its state to the operating system).
Returns the current assumed resolution of the printer, as set by setResolution() or by the printer driver.
See also setResolution().
Sets the default value for collation checkbox when the print dialog appears. If collate is true, it will enable setCollateCopiesEnabled(). Значение по умолчанию равно false. This value will be changed by what the user presses in the print dialog.
Эта функция была введена в Qt 4.1.
See also collateCopies().
Sets the printer's color mode to newColorMode, which can be either Color or GrayScale.
Смотрите также colorMode().
Sets the name of the application that created the document to creator.
This function is only applicable to the X11 version of Qt. If no creator name is specified, the creator will be set to "Qt" followed by some version number.
See also creator().
Sets the document name to name.
On X11, the document name is for example used as the default output filename in QPrintDialog. Note that the document name does not affect the file name if the printer is printing to a file. Use the setOutputFile() function for this.
See also docName() and QPrintEngine::PrintEnginePropertyKey.
Enables double sided printing if doubleSided is true; otherwise disables it.
Currently this option is only supported on X11.
Эта функция была введена в Qt 4.2.
See also doubleSidedPrinting().
Enables double sided printing based on the duplex mode.
Currently this option is only supported on X11.
Эта функция была введена в Qt 4.4.
See also duplex().
This function is used by subclasses of QPrinter to specify custom print and paint engines (printEngine and paintEngine, respectively).
QPrinter does not take ownership of the engines, so you need to manage these engine instances yourself.
Note that changing the engines will reset the printer state and all its properties.
Эта функция была введена в Qt 4.1.
See also printEngine(), paintEngine(), and setOutputFormat().
Enabled or disables font embedding depending on enable.
Currently this option is only supported on X11.
Эта функция была введена в Qt 4.1.
See also fontEmbeddingEnabled().
Sets the range of pages to be printed to cover the pages with numbers specified by from and to, where from corresponds to the first page in the range and to corresponds to the last.
Note: Pages in a document are numbered according to the convention that the first page is page 1. However, if from and to are both set to 0, the whole document will be printed.
This function is mostly used to set a default value that the user can override in the print dialog when you call setup().
Эта функция была введена в Qt 4.1.
See also fromPage() and toPage().
If fp is true, enables support for painting over the entire page; otherwise restricts painting to the printable area reported by the device.
By default, full page printing is disabled. In this case, the origin of the QPrinter's coordinate system coincides with the top-left corner of the printable area.
If full page printing is enabled, the origin of the QPrinter's coordinate system coincides with the top-left corner of the paper itself. In this case, the device metrics will report the exact same dimensions as indicated by PaperSize. It may not be possible to print on the entire physical page because of the printer's margins, so the application must account for the margins itself.
See also fullPage(), setPaperSize(), width(), height(), and Printing with Qt.
Присваивает количество копий для печати равным numCopies.
Драйвер принтера читает это присвоение и печатает заданное количество копий.
Смотрите также numCopies().
Sets the print orientation to orientation.
The orientation can be either QPrinter::Portrait or QPrinter::Landscape.
The printer driver reads this setting and prints using the specified orientation.
On Windows, this option can be changed while printing and will take effect from the next call to newPage().
On Mac OS X, changing the orientation during a print job has no effect.
Смотрите также orientation().
Sets the name of the output file to fileName.
Setting a null or empty name (0 or "") disables printing to a file. Setting a non-empty name enables printing to a file.
This can change the value of outputFormat(). If the file name has the suffix ".ps" then PostScript is automatically selected as output format. If the file name has the ".pdf" suffix PDF is generated. If the file name has a suffix other than ".ps" and ".pdf", the output format used is the one set with setOutputFormat().
QPrinter uses Qt's cross-platform PostScript or PDF print engines respectively. If you can produce this format natively, for example Mac OS X can generate PDF's from its print engine, set the output format back to NativeFormat.
See also outputFileName(), setOutputToFile(), and setOutputFormat().
Sets the output format for this printer to format.
Эта функция была введена в Qt 4.1.
See also outputFormat().
This function sets the left, top, right and bottom page margins for this printer. The unit of the margins are specified with the unit parameter.
Эта функция была введена в Qt 4.4.
Sets the page order to pageOrder.
The page order can be QPrinter::FirstPageFirst or QPrinter::LastPageFirst. The application is responsible for reading the page order and printing accordingly.
This function is mostly useful for setting a default value that the user can override in the print dialog.
This function is only supported under X11.
See also pageOrder().
Sets the printer paper size to newPaperSize if that size is supported. The result is undefined if newPaperSize is not supported.
The default paper size is driver-dependent.
This function is useful mostly for setting a default value that the user can override in the print dialog.
Эта функция была введена в Qt 4.4.
See also paperSize(), PaperSize, setFullPage(), setResolution(), pageRect(), and paperRect().
Sets the paper size based on paperSize in unit.
Эта функция была введена в Qt 4.4.
See also paperSize().
Sets the paper source setting to source.
Windows only: This option can be changed while printing and will take effect from the next call to newPage()
See also paperSource().
Sets the name of the program that should do the print job to printProg.
On X11, this function sets the program to call with the PostScript output. On other platforms, it has no effect.
See also printProgram().
Sets the print range option in to be range.
Эта функция была введена в Qt 4.1.
Смотрите также printRange().
Sets the printer name to name.
See also printerName() and isValid().
Sets the printer to use option to select the printer. option is null by default (which implies that Qt should be smart enough to guess correctly), but it can be set to other values to use a specific printer selection option.
If the printer selection option is changed while the printer is active, the current print job may or may not be affected.
Warning: This function is not available on Windows.
See also printerSelectionOption().
Requests that the printer prints at dpi or as near to dpi as possible.
This setting affects the coordinate system as returned by, for example QPainter::viewport().
This function must be called before QPainter::begin() to have an effect on all platforms.
See also resolution() and setPaperSize().
Sets the page size to be used by the printer under Windows to pageSize.
Warning: This function is not portable so you may prefer to use setPaperSize() instead.
See also winPageSize().
Returns the supported paper sizes for this printer.
The values will be either a value that matches an entry in the QPrinter::PaperSource enum or a driver spesific value. The driver spesific values are greater than the constant DMBIN_USER declared in wingdi.h.
Warning: This function is only available in windows.
Returns a list of the resolutions (a list of dots-per-inch integers) that the printer says it supports.
For X11 where all printing is directly to postscript, this function will always return a one item list containing only the postscript resolution, i.e., 72 (72 dpi -- but see PrinterMode).
Returns the number of the last page in a range of pages to be printed (the "to page" setting). Pages in a document are numbered according to the convention that the first page is page 1.
By default, this function returns a special value of 0, meaning that the "to page" setting is unset.
Note: If fromPage() and toPage() both return 0, this indicates that the whole document will be printed.
The programmer is responsible for reading this setting and printing accordingly.
Эта функция была введена в Qt 4.1.
See also setFromTo() and fromPage().
Returns the page size used by the printer under Windows.
Warning: This function is not portable so you may prefer to use paperSize() instead.
See also setWinPageSize().
Авторские права © 2010 Nokia Corporation и/или её дочерние компании | Торговые марки | Qt 4.6.4 |
Попытка перевода Qt документации. Если есть желание присоединиться, или если есть замечания или пожелания, то заходите на форум: Перевод Qt документации на русский язык... Люди внесшие вклад в перевод: Команда переводчиков |