Expressions¶This chapter explains the meaning of the elements of expressions in Python. Syntax Notes: In this and the following chapters, extended BNF notation will be used to describe syntax, not lexical analysis. When (one alternative of) a syntax rule has the form name ::= othername
and no semantics are given, the semantics of this form of name are the same as for othername. Arithmetic conversions¶When a description of an arithmetic operator below uses the phrase “the numeric arguments are converted to a common type,” the arguments are coerced using the coercion rules listed at Coercion rules. If both arguments are standard numeric types, the following coercions are applied:
Some additional rules apply for certain operators (e.g., a string left argument to the ‘%’ operator). Extensions can define their own coercions. Atoms¶Atoms are the most basic elements of expressions. The simplest atoms are identifiers or literals. Forms enclosed in reverse quotes or in parentheses, brackets or braces are also categorized syntactically as atoms. The syntax for atoms is: atom ::= identifier  literal  enclosure enclosure ::= parenth_form  list_display  generator_expression  dict_display  string_conversion  yield_atom Identifiers (Names)¶An identifier occurring as an atom is a name. See section Identifiers and keywords for lexical definition and section Naming and binding for documentation of naming and binding. When the name is bound to an object, evaluation of the atom yields that object. When a name is not bound, an attempt to evaluate it raises a NameError exception. Private name mangling: When an identifier that textually occurs in a class definition begins with two or more underscore characters and does not end in two or more underscores, it is considered a private name of that class. Private names are transformed to a longer form before code is generated for them. The transformation inserts the class name in front of the name, with leading underscores removed, and a single underscore inserted in front of the class name. For example, the identifier __spam occurring in a class named Ham will be transformed to _Ham__spam. This transformation is independent of the syntactical context in which the identifier is used. If the transformed name is extremely long (longer than 255 characters), implementation defined truncation may happen. If the class name consists only of underscores, no transformation is done. Literals¶Python supports string literals and various numeric literals: literal ::= stringliteral  integer  longinteger  floatnumber  imagnumber Evaluation of a literal yields an object of the given type (string, integer, long integer, floating point number, complex number) with the given value. The value may be approximated in the case of floating point and imaginary (complex) literals. See section Literals for details. All literals correspond to immutable data types, and hence the object’s identity is less important than its value. Multiple evaluations of literals with the same value (either the same occurrence in the program text or a different occurrence) may obtain the same object or a different object with the same value. Parenthesized forms¶A parenthesized form is an optional expression list enclosed in parentheses: parenth_form ::= "(" [expression_list] ")" A parenthesized expression list yields whatever that expression list yields: if the list contains at least one comma, it yields a tuple; otherwise, it yields the single expression that makes up the expression list. An empty pair of parentheses yields an empty tuple object. Since tuples are immutable, the rules for literals apply (i.e., two occurrences of the empty tuple may or may not yield the same object). Note that tuples are not formed by the parentheses, but rather by use of the comma operator. The exception is the empty tuple, for which parentheses are required — allowing unparenthesized “nothing” in expressions would cause ambiguities and allow common typos to pass uncaught. List displays¶A list display is a possibly empty series of expressions enclosed in square brackets: list_display ::= "[" [expression_list  list_comprehension] "]" list_comprehension ::= expression list_for list_for ::= "for" target_list "in" old_expression_list [list_iter] old_expression_list ::= old_expression [("," old_expression)+ [","]] list_iter ::= list_for  list_if list_if ::= "if" old_expression [list_iter] A list display yields a new list object. Its contents are specified by providing either a list of expressions or a list comprehension. When a commaseparated list of expressions is supplied, its elements are evaluated from left to right and placed into the list object in that order. When a list comprehension is supplied, it consists of a single expression followed by at least one for clause and zero or more for or if clauses. In this case, the elements of the new list are those that would be produced by considering each of the for or if clauses a block, nesting from left to right, and evaluating the expression to produce a list element each time the innermost block is reached [1]. Generator expressions¶A generator expression is a compact generator notation in parentheses: generator_expression ::= "(" expression genexpr_for ")" genexpr_for ::= "for" target_list "in" or_test [genexpr_iter] genexpr_iter ::= genexpr_for  genexpr_if genexpr_if ::= "if" old_expression [genexpr_iter] A generator expression yields a new generator object. It consists of a single expression followed by at least one for clause and zero or more for or if clauses. The iterating values of the new generator are those that would be produced by considering each of the for or if clauses a block, nesting from left to right, and evaluating the expression to yield a value that is reached the innermost block for each iteration. Variables used in the generator expression are evaluated lazily in a separate scope when the next() method is called for the generator object (in the same fashion as for normal generators). However, the in expression of the leftmost for clause is immediately evaluated in the current scope so that an error produced by it can be seen before any other possible error in the code that handles the generator expression. Subsequent for and if clauses cannot be evaluated immediately since they may depend on the previous for loop. For example: (x*y for x in range(10) for y in bar(x)). The parentheses can be omitted on calls with only one argument. See section Calls for the detail. Dictionary displays¶A dictionary display is a possibly empty series of key/datum pairs enclosed in curly braces: dict_display ::= "{" [key_datum_list] "}" key_datum_list ::= key_datum ("," key_datum)* [","] key_datum ::= expression ":" expression A dictionary display yields a new dictionary object. The key/datum pairs are evaluated from left to right to define the entries of the dictionary: each key object is used as a key into the dictionary to store the corresponding datum. Restrictions on the types of the key values are listed earlier in section The standard type hierarchy. (To summarize, the key type should be hashable, which excludes all mutable objects.) Clashes between duplicate keys are not detected; the last datum (textually rightmost in the display) stored for a given key value prevails. String conversions¶A string conversion is an expression list enclosed in reverse (a.k.a. backward) quotes: string_conversion ::= "'" expression_list "'" A string conversion evaluates the contained expression list and converts the resulting object into a string according to rules specific to its type. If the object is a string, a number, None, or a tuple, list or dictionary containing only objects whose type is one of these, the resulting string is a valid Python expression which can be passed to the builtin function eval() to yield an expression with the same value (or an approximation, if floating point numbers are involved). (In particular, converting a string adds quotes around it and converts “funny” characters to escape sequences that are safe to print.) Recursive objects (for example, lists or dictionaries that contain a reference to themselves, directly or indirectly) use ... to indicate a recursive reference, and the result cannot be passed to eval() to get an equal value (SyntaxError will be raised instead). The builtin function repr() performs exactly the same conversion in its argument as enclosing it in parentheses and reverse quotes does. The builtin function str() performs a similar but more userfriendly conversion. Yield expressions¶yield_atom ::= "(" yield_expression ")" yield_expression ::= "yield" [expression_list] New in version 2.5. The yield expression is only used when defining a generator function, and can only be used in the body of a function definition. Using a yield expression in a function definition is sufficient to cause that definition to create a generator function instead of a normal function. When a generator function is called, it returns an iterator known as a generator. That generator then controls the execution of a generator function. The execution starts when one of the generator’s methods is called. At that time, the execution proceeds to the first yield expression, where it is suspended again, returning the value of expression_list to generator’s caller. By suspended we mean that all local state is retained, including the current bindings of local variables, the instruction pointer, and the internal evaluation stack. When the execution is resumed by calling one of the generator’s methods, the function can proceed exactly as if the yield expression was just another external call. The value of the yield expression after resuming depends on the method which resumed the execution. All of this makes generator functions quite similar to coroutines; they yield multiple times, they have more than one entry point and their execution can be suspended. The only difference is that a generator function cannot control where should the execution continue after it yields; the control is always transfered to the generator’s caller. The following generator’s methods can be used to control the execution of a generator function:
Here is a simple example that demonstrates the behavior of generators and generator functions: >>> def echo(value=None):
... print "Execution starts when 'next()' is called for the first time."
... try:
... while True:
... try:
... value = (yield value)
... except Exception, e:
... value = e
... finally:
... print "Don't forget to clean up when 'close()' is called."
...
>>> generator = echo(1)
>>> print generator.next()
Execution starts when 'next()' is called for the first time.
1
>>> print generator.next()
None
>>> print generator.send(2)
2
>>> generator.throw(TypeError, "spam")
TypeError('spam',)
>>> generator.close()
Don't forget to clean up when 'close()' is called.
See also
Primaries¶Primaries represent the most tightly bound operations of the language. Their syntax is: primary ::= atom  attributeref  subscription  slicing  call Attribute references¶An attribute reference is a primary followed by a period and a name: attributeref ::= primary "." identifier The primary must evaluate to an object of a type that supports attribute references, e.g., a module, list, or an instance. This object is then asked to produce the attribute whose name is the identifier. If this attribute is not available, the exception AttributeError is raised. Otherwise, the type and value of the object produced is determined by the object. Multiple evaluations of the same attribute reference may yield different objects. Subscriptions¶A subscription selects an item of a sequence (string, tuple or list) or mapping (dictionary) object: subscription ::= primary "[" expression_list "]" The primary must evaluate to an object of a sequence or mapping type. If the primary is a mapping, the expression list must evaluate to an object whose value is one of the keys of the mapping, and the subscription selects the value in the mapping that corresponds to that key. (The expression list is a tuple except if it has exactly one item.) If the primary is a sequence, the expression (list) must evaluate to a plain integer. If this value is negative, the length of the sequence is added to it (so that, e.g., x[1] selects the last item of x.) The resulting value must be a nonnegative integer less than the number of items in the sequence, and the subscription selects the item whose index is that value (counting from zero). A string’s items are characters. A character is not a separate data type but a string of exactly one character. Slicings¶A slicing selects a range of items in a sequence object (e.g., a string, tuple or list). Slicings may be used as expressions or as targets in assignment or del statements. The syntax for a slicing: slicing ::= simple_slicing  extended_slicing simple_slicing ::= primary "[" short_slice "]" extended_slicing ::= primary "[" slice_list "]" slice_list ::= slice_item ("," slice_item)* [","] slice_item ::= expression  proper_slice  ellipsis proper_slice ::= short_slice  long_slice short_slice ::= [lower_bound] ":" [upper_bound] long_slice ::= short_slice ":" [stride] lower_bound ::= expression upper_bound ::= expression stride ::= expression ellipsis ::= "..." There is ambiguity in the formal syntax here: anything that looks like an expression list also looks like a slice list, so any subscription can be interpreted as a slicing. Rather than further complicating the syntax, this is disambiguated by defining that in this case the interpretation as a subscription takes priority over the interpretation as a slicing (this is the case if the slice list contains no proper slice nor ellipses). Similarly, when the slice list has exactly one short slice and no trailing comma, the interpretation as a simple slicing takes priority over that as an extended slicing. The semantics for a simple slicing are as follows. The primary must evaluate to a sequence object. The lower and upper bound expressions, if present, must evaluate to plain integers; defaults are zero and the sys.maxint, respectively. If either bound is negative, the sequence’s length is added to it. The slicing now selects all items with index k such that i <= k < j where i and j are the specified lower and upper bounds. This may be an empty sequence. It is not an error if i or j lie outside the range of valid indexes (such items don’t exist so they aren’t selected). The semantics for an extended slicing are as follows. The primary must evaluate to a mapping object, and it is indexed with a key that is constructed from the slice list, as follows. If the slice list contains at least one comma, the key is a tuple containing the conversion of the slice items; otherwise, the conversion of the lone slice item is the key. The conversion of a slice item that is an expression is that expression. The conversion of an ellipsis slice item is the builtin Ellipsis object. The conversion of a proper slice is a slice object (see section The standard type hierarchy) whose start, stop and step attributes are the values of the expressions given as lower bound, upper bound and stride, respectively, substituting None for missing expressions. Calls¶A call calls a callable object (e.g., a function) with a possibly empty series of arguments: call ::= primary "(" [argument_list [","]  expression genexpr_for] ")" argument_list ::= positional_arguments ["," keyword_arguments] ["," "*" expression] ["," keyword_arguments] ["," "**" expression]  keyword_arguments ["," "*" expression] ["," "**" expression]  "*" expression ["," "*" expression] ["," "**" expression]  "**" expression positional_arguments ::= expression ("," expression)* keyword_arguments ::= keyword_item ("," keyword_item)* keyword_item ::= identifier "=" expression A trailing comma may be present after the positional and keyword arguments but does not affect the semantics. The primary must evaluate to a callable object (userdefined functions, builtin functions, methods of builtin objects, class objects, methods of class instances, and certain class instances themselves are callable; extensions may define additional callable object types). All argument expressions are evaluated before the call is attempted. Please refer to section Function definitions for the syntax of formal parameter lists. If keyword arguments are present, they are first converted to positional arguments, as follows. First, a list of unfilled slots is created for the formal parameters. If there are N positional arguments, they are placed in the first N slots. Next, for each keyword argument, the identifier is used to determine the corresponding slot (if the identifier is the same as the first formal parameter name, the first slot is used, and so on). If the slot is already filled, a TypeError exception is raised. Otherwise, the value of the argument is placed in the slot, filling it (even if the expression is None, it fills the slot). When all arguments have been processed, the slots that are still unfilled are filled with the corresponding default value from the function definition. (Default values are calculated, once, when the function is defined; thus, a mutable object such as a list or dictionary used as default value will be shared by all calls that don’t specify an argument value for the corresponding slot; this should usually be avoided.) If there are any unfilled slots for which no default value is specified, a TypeError exception is raised. Otherwise, the list of filled slots is used as the argument list for the call. Note An implementation may provide builtin functions whose positional parameters do not have names, even if they are ‘named’ for the purpose of documentation, and which therefore cannot be supplied by keyword. In CPython, this is the case for functions implemented in C that use PyArg_ParseTuple to parse their arguments. If there are more positional arguments than there are formal parameter slots, a TypeError exception is raised, unless a formal parameter using the syntax *identifier is present; in this case, that formal parameter receives a tuple containing the excess positional arguments (or an empty tuple if there were no excess positional arguments). If any keyword argument does not correspond to a formal parameter name, a TypeError exception is raised, unless a formal parameter using the syntax **identifier is present; in this case, that formal parameter receives a dictionary containing the excess keyword arguments (using the keywords as keys and the argument values as corresponding values), or a (new) empty dictionary if there were no excess keyword arguments. If the syntax *expression appears in the function call, expression must evaluate to a sequence. Elements from this sequence are treated as if they were additional positional arguments; if there are positional arguments x1,..., xN, and expression evaluates to a sequence y1, ..., yM, this is equivalent to a call with M+N positional arguments x1, ..., xN, y1, ..., yM. A consequence of this is that although the *expression syntax may appear after some keyword arguments, it is processed before the keyword arguments (and the **expression argument, if any – see below). So: >>> def f(a, b):
... print a, b
...
>>> f(b=1, *(2,))
2 1
>>> f(a=1, *(2,))
Traceback (most recent call last):
File "<stdin>", line 1, in ?
TypeError: f() got multiple values for keyword argument 'a'
>>> f(1, *(2,))
1 2
It is unusual for both keyword arguments and the *expression syntax to be used in the same call, so in practice this confusion does not arise. If the syntax **expression appears in the function call, expression must evaluate to a mapping, the contents of which are treated as additional keyword arguments. In the case of a keyword appearing in both expression and as an explicit keyword argument, a TypeError exception is raised. Formal parameters using the syntax *identifier or **identifier cannot be used as positional argument slots or as keyword argument names. Formal parameters using the syntax (sublist) cannot be used as keyword argument names; the outermost sublist corresponds to a single unnamed argument slot, and the argument value is assigned to the sublist using the usual tuple assignment rules after all other parameter processing is done. A call always returns some value, possibly None, unless it raises an exception. How this value is computed depends on the type of the callable object. If it is—
The power operator¶The power operator binds more tightly than unary operators on its left; it binds less tightly than unary operators on its right. The syntax is: power ::= primary ["**" u_expr] Thus, in an unparenthesized sequence of power and unary operators, the operators are evaluated from right to left (this does not constrain the evaluation order for the operands): 1**2 results in 1. The power operator has the same semantics as the builtin pow() function, when called with two arguments: it yields its left argument raised to the power of its right argument. The numeric arguments are first converted to a common type. The result type is that of the arguments after coercion. With mixed operand types, the coercion rules for binary arithmetic operators apply. For int and long int operands, the result has the same type as the operands (after coercion) unless the second argument is negative; in that case, all arguments are converted to float and a float result is delivered. For example, 10**2 returns 100, but 10**2 returns 0.01. (This last feature was added in Python 2.2. In Python 2.1 and before, if both arguments were of integer types and the second argument was negative, an exception was raised). Raising 0.0 to a negative power results in a ZeroDivisionError. Raising a negative number to a fractional power results in a ValueError. Unary arithmetic operations¶All unary arithmetic (and bitwise) operations have the same priority: u_expr ::= power  "" u_expr  "+" u_expr  "~" u_expr The unary  (minus) operator yields the negation of its numeric argument. The unary + (plus) operator yields its numeric argument unchanged. The unary ~ (invert) operator yields the bitwise inversion of its plain or long integer argument. The bitwise inversion of x is defined as (x+1). It only applies to integral numbers. In all three cases, if the argument does not have the proper type, a TypeError exception is raised. Binary arithmetic operations¶The binary arithmetic operations have the conventional priority levels. Note that some of these operations also apply to certain nonnumeric types. Apart from the power operator, there are only two levels, one for multiplicative operators and one for additive operators: m_expr ::= u_expr  m_expr "*" u_expr  m_expr "//" u_expr  m_expr "/" u_expr  m_expr "%" u_expr a_expr ::= m_expr  a_expr "+" m_expr  a_expr "" m_expr The * (multiplication) operator yields the product of its arguments. The arguments must either both be numbers, or one argument must be an integer (plain or long) and the other must be a sequence. In the former case, the numbers are converted to a common type and then multiplied together. In the latter case, sequence repetition is performed; a negative repetition factor yields an empty sequence. The / (division) and // (floor division) operators yield the quotient of their arguments. The numeric arguments are first converted to a common type. Plain or long integer division yields an integer of the same type; the result is that of mathematical division with the ‘floor’ function applied to the result. Division by zero raises the ZeroDivisionError exception. The % (modulo) operator yields the remainder from the division of the first argument by the second. The numeric arguments are first converted to a common type. A zero right argument raises the ZeroDivisionError exception. The arguments may be floating point numbers, e.g., 3.14%0.7 equals 0.34 (since 3.14 equals 4*0.7 + 0.34.) The modulo operator always yields a result with the same sign as its second operand (or zero); the absolute value of the result is strictly smaller than the absolute value of the second operand [2]. The integer division and modulo operators are connected by the following identity: x == (x/y)*y + (x%y). Integer division and modulo are also connected with the builtin function divmod(): divmod(x, y) == (x/y, x%y). These identities don’t hold for floating point numbers; there similar identities hold approximately where x/y is replaced by floor(x/y) or floor(x/y)  1 [3]. In addition to performing the modulo operation on numbers, the % operator is also overloaded by string and unicode objects to perform string formatting (also known as interpolation). The syntax for string formatting is described in the Python Library Reference, section String Formatting Operations. Deprecated since version 2.3: The floor division operator, the modulo operator, and the divmod() function are no longer defined for complex numbers. Instead, convert to a floating point number using the abs() function if appropriate. The + (addition) operator yields the sum of its arguments. The arguments must either both be numbers or both sequences of the same type. In the former case, the numbers are converted to a common type and then added together. In the latter case, the sequences are concatenated. The  (subtraction) operator yields the difference of its arguments. The numeric arguments are first converted to a common type. Shifting operations¶The shifting operations have lower priority than the arithmetic operations: shift_expr ::= a_expr  shift_expr ( "<<"  ">>" ) a_expr These operators accept plain or long integers as arguments. The arguments are converted to a common type. They shift the first argument to the left or right by the number of bits given by the second argument. A right shift by n bits is defined as division by pow(2, n). A left shift by n bits is defined as multiplication with pow(2, n). Negative shift counts raise a ValueError exception. Binary bitwise operations¶Each of the three bitwise operations has a different priority level: and_expr ::= shift_expr  and_expr "&" shift_expr xor_expr ::= and_expr  xor_expr "^" and_expr or_expr ::= xor_expr  or_expr "" xor_expr The & operator yields the bitwise AND of its arguments, which must be plain or long integers. The arguments are converted to a common type. The ^ operator yields the bitwise XOR (exclusive OR) of its arguments, which must be plain or long integers. The arguments are converted to a common type. The  operator yields the bitwise (inclusive) OR of its arguments, which must be plain or long integers. The arguments are converted to a common type. Comparisons¶Unlike C, all comparison operations in Python have the same priority, which is lower than that of any arithmetic, shifting or bitwise operation. Also unlike C, expressions like a < b < c have the interpretation that is conventional in mathematics: comparison ::= or_expr ( comp_operator or_expr )* comp_operator ::= "<"  ">"  "=="  ">="  "<="  "<>"  "!="  "is" ["not"]  ["not"] "in" Comparisons yield boolean values: True or False. Comparisons can be chained arbitrarily, e.g., x < y <= z is equivalent to x < y and y <= z, except that y is evaluated only once (but in both cases z is not evaluated at all when x < y is found to be false). Formally, if a, b, c, ..., y, z are expressions and op1, op2, ..., opN are comparison operators, then a op1 b op2 c ... y opN z is equivalent to a op1 b and b op2 c and ... y opN z, except that each expression is evaluated at most once. Note that a op1 b op2 c doesn’t imply any kind of comparison between a and c, so that, e.g., x < y > z is perfectly legal (though perhaps not pretty). The forms <> and != are equivalent; for consistency with C, != is preferred; where != is mentioned below <> is also accepted. The <> spelling is considered obsolescent. The operators <, >, ==, >=, <=, and != compare the values of two objects. The objects need not have the same type. If both are numbers, they are converted to a common type. Otherwise, objects of different types always compare unequal, and are ordered consistently but arbitrarily. You can control comparison behavior of objects of nonbuiltin types by defining a __cmp__ method or rich comparison methods like __gt__, described in section Special method names. (This unusual definition of comparison was used to simplify the definition of operations like sorting and the in and not in operators. In the future, the comparison rules for objects of different types are likely to change.) Comparison of objects of the same type depends on the type:
The operators in and not in test for collection membership. x in s evaluates to true if x is a member of the collection s, and false otherwise. x not in s returns the negation of x in s. The collection membership test has traditionally been bound to sequences; an object is a member of a collection if the collection is a sequence and contains an element equal to that object. However, it make sense for many other object types to support membership tests without being a sequence. In particular, dictionaries (for keys) and sets support membership testing. For the list and tuple types, x in y is true if and only if there exists an index i such that x == y[i] is true. For the Unicode and string types, x in y is true if and only if x is a substring of y. An equivalent test is y.find(x) != 1. Note, x and y need not be the same type; consequently, u'ab' in 'abc' will return True. Empty strings are always considered to be a substring of any other string, so "" in "abc" will return True. Changed in version 2.3: Previously, x was required to be a string of length 1. For userdefined classes which define the __contains__() method, x in y is true if and only if y.__contains__(x) is true. For userdefined classes which do not define __contains__() and do define __getitem__(), x in y is true if and only if there is a nonnegative integer index i such that x == y[i], and all lower integer indices do not raise IndexError exception. (If any other exception is raised, it is as if in raised that exception). The operator not in is defined to have the inverse true value of in. The operators is and is not test for object identity: x is y is true if and only if x and y are the same object. x is not y yields the inverse truth value. [7] Boolean operations¶Boolean operations have the lowest priority of all Python operations: expression ::= conditional_expression  lambda_form old_expression ::= or_test  old_lambda_form conditional_expression ::= or_test ["if" or_test "else" expression] or_test ::= and_test  or_test "or" and_test and_test ::= not_test  and_test "and" not_test not_test ::= comparison  "not" not_test In the context of Boolean operations, and also when expressions are used by control flow statements, the following values are interpreted as false: False, None, numeric zero of all types, and empty strings and containers (including strings, tuples, lists, dictionaries, sets and frozensets). All other values are interpreted as true. (See the __nonzero__() special method for a way to change this.) The operator not yields True if its argument is false, False otherwise. The expression x if C else y first evaluates C (not x); if C is true, x is evaluated and its value is returned; otherwise, y is evaluated and its value is returned. New in version 2.5. The expression x and y first evaluates x; if x is false, its value is returned; otherwise, y is evaluated and the resulting value is returned. The expression x or y first evaluates x; if x is true, its value is returned; otherwise, y is evaluated and the resulting value is returned. (Note that neither and nor or restrict the value and type they return to False and True, but rather return the last evaluated argument. This is sometimes useful, e.g., if s is a string that should be replaced by a default value if it is empty, the expression s or 'foo' yields the desired value. Because not has to invent a value anyway, it does not bother to return a value of the same type as its argument, so e.g., not 'foo' yields False, not ''.) Lambdas¶lambda_form ::= "lambda" [parameter_list]: expression old_lambda_form ::= "lambda" [parameter_list]: old_expression Lambda forms (lambda expressions) have the same syntactic position as expressions. They are a shorthand to create anonymous functions; the expression lambda arguments: expression yields a function object. The unnamed object behaves like a function object defined with def name(arguments):
return expression
See section Function definitions for the syntax of parameter lists. Note that functions created with lambda forms cannot contain statements. Expression lists¶expression_list ::= expression ( "," expression )* [","] An expression list containing at least one comma yields a tuple. The length of the tuple is the number of expressions in the list. The expressions are evaluated from left to right. The trailing comma is required only to create a single tuple (a.k.a. a singleton); it is optional in all other cases. A single expression without a trailing comma doesn’t create a tuple, but rather yields the value of that expression. (To create an empty tuple, use an empty pair of parentheses: ().) Evaluation order¶Python evaluates expressions from left to right. Notice that while evaluating an assignment, the righthand side is evaluated before the lefthand side. In the following lines, expressions will be evaluated in the arithmetic order of their suffixes: expr1, expr2, expr3, expr4
(expr1, expr2, expr3, expr4)
{expr1: expr2, expr3: expr4}
expr1 + expr2 * (expr3  expr4)
expr1(expr2, expr3, *expr4, **expr5)
expr3, expr4 = expr1, expr2
Summary¶The following table summarizes the operator precedences in Python, from lowest precedence (least binding) to highest precedence (most binding). Operators in the same box have the same precedence. Unless the syntax is explicitly given, operators are binary. Operators in the same box group left to right (except for comparisons, including tests, which all have the same precedence and chain from left to right — see section Comparisons — and exponentiation, which groups from right to left).
Footnotes
