warnings — Warning control
New in version 2.1.
Warning messages are typically issued in situations where it is useful to alert
the user of some condition in a program, where that condition (normally) doesn’t
warrant raising an exception and terminating the program. For example, one
might want to issue a warning when a program uses an obsolete module.
Python programmers issue warnings by calling the warn() function defined
in this module. (C programmers use PyErr_WarnEx; see
Exception Handling for details).
Warning messages are normally written to sys.stderr, but their disposition
can be changed flexibly, from ignoring all warnings to turning them into
exceptions. The disposition of warnings can vary based on the warning category
(see below), the text of the warning message, and the source location where it
is issued. Repetitions of a particular warning for the same source location are
typically suppressed.
There are two stages in warning control: first, each time a warning is issued, a
determination is made whether a message should be issued or not; next, if a
message is to be issued, it is formatted and printed using a user-settable hook.
The determination whether to issue a warning message is controlled by the
warning filter, which is a sequence of matching rules and actions. Rules can be
added to the filter by calling filterwarnings() and reset to its default
state by calling resetwarnings().
The printing of warning messages is done by calling showwarning(), which
may be overridden; the default implementation of this function formats the
message by calling formatwarning(), which is also available for use by
custom implementations.
Warning Categories
There are a number of built-in exceptions that represent warning categories.
This categorization is useful to be able to filter out groups of warnings. The
following warnings category classes are currently defined:
Class |
Description |
Warning |
This is the base class of all warning
category classes. It is a subclass of
Exception. |
UserWarning |
The default category for warn(). |
DeprecationWarning |
Base category for warnings about deprecated
features. |
SyntaxWarning |
Base category for warnings about dubious
syntactic features. |
RuntimeWarning |
Base category for warnings about dubious
runtime features. |
FutureWarning |
Base category for warnings about constructs
that will change semantically in the future. |
PendingDeprecationWarning |
Base category for warnings about features
that will be deprecated in the future
(ignored by default). |
ImportWarning |
Base category for warnings triggered during
the process of importing a module (ignored by
default). |
UnicodeWarning |
Base category for warnings related to
Unicode. |
While these are technically built-in exceptions, they are documented here,
because conceptually they belong to the warnings mechanism.
User code can define additional warning categories by subclassing one of the
standard warning categories. A warning category must always be a subclass of
the Warning class.
The Warnings Filter
The warnings filter controls whether warnings are ignored, displayed, or turned
into errors (raising an exception).
Conceptually, the warnings filter maintains an ordered list of filter
specifications; any specific warning is matched against each filter
specification in the list in turn until a match is found; the match determines
the disposition of the match. Each entry is a tuple of the form (action,
message, category, module, lineno), where:
action is one of the following strings:
Value
|
Disposition
|
"error"
|
turn matching warnings into exceptions
|
"ignore"
|
never print matching warnings
|
"always"
|
always print matching warnings
|
"default"
|
print the first occurrence of matching
warnings for each location where the warning
is issued
|
"module"
|
print the first occurrence of matching
warnings for each module where the warning
is issued
|
"once"
|
print only the first occurrence of matching
warnings, regardless of location
|
message is a string containing a regular expression that the warning message
must match (the match is compiled to always be case-insensitive)
category is a class (a subclass of Warning) of which the warning
category must be a subclass in order to match
module is a string containing a regular expression that the module name must
match (the match is compiled to be case-sensitive)
lineno is an integer that the line number where the warning occurred must
match, or 0 to match all line numbers
Since the Warning class is derived from the built-in Exception
class, to turn a warning into an error we simply raise category(message).
The warnings filter is initialized by -W options passed to the Python
interpreter command line. The interpreter saves the arguments for all
-W options without interpretation in sys.warnoptions; the
warnings module parses these when it is first imported (invalid options
are ignored, after printing a message to sys.stderr).
The warnings that are ignored by default may be enabled by passing -Wd
to the interpreter. This enables default handling for all warnings, including
those that are normally ignored by default. This is particular useful for
enabling ImportWarning when debugging problems importing a developed package.
ImportWarning can also be enabled explicitly in Python code using:
warnings.simplefilter('default', ImportWarning)
Temporarily Suppressing Warnings
If you are using code that you know will raise a warning, such as a deprecated
function, but do not want to see the warning, then it is possible to suppress
the warning using the catch_warnings context manager:
import warnings
def fxn():
warnings.warn("deprecated", DeprecationWarning)
with warnings.catch_warnings():
warnings.simplefilter("ignore")
fxn()
While within the context manager all warnings will simply be ignored. This
allows you to use known-deprecated code without having to see the warning while
not suppressing the warning for other code that might not be aware of its use
of deprecated code.
Testing Warnings
To test warnings raised by code, use the catch_warnings context
manager. With it you can temporarily mutate the warnings filter to facilitate
your testing. For instance, do the following to capture all raised warnings to
check:
import warnings
def fxn():
warnings.warn("deprecated", DeprecationWarning)
with warnings.catch_warnings(record=True) as w:
# Cause all warnings to always be triggered.
warnings.simplefilter("always")
# Trigger a warning.
fxn()
# Verify some things
assert len(w) == 1
assert isinstance(w[-1].category, DeprecationWarning)
assert "deprecated" in str(w[-1].message)
One can also cause all warnings to be exceptions by using error instead of
always. One thing to be aware of is that if a warning has already been
raised because of a once/default rule, then no matter what filters are
set the warning will not be seen again unless the warnings registry related to
the warning has been cleared.
Once the context manager exits, the warnings filter is restored to its state
when the context was entered. This prevents tests from changing the warnings
filter in unexpected ways between tests and leading to indeterminate test
results. The showwarning() function in the module is also restored to
its original value.
When testing multiple operations that raise the same kind of warning, it
is important to test them in a manner that confirms each operation is raising
a new warning (e.g. set warnings to be raised as exceptions and check the
operations raise exceptions, check that the length of the warning list
continues to increase after each operation, or else delete the previous
entries from the warnings list before each new operation).
Available Functions
-
warnings.warn(message[, category[, stacklevel]])
Issue a warning, or maybe ignore it or raise an exception. The category
argument, if given, must be a warning category class (see above); it defaults to
UserWarning. Alternatively message can be a Warning instance,
in which case category will be ignored and message.__class__ will be used.
In this case the message text will be str(message). This function raises an
exception if the particular warning issued is changed into an error by the
warnings filter see above. The stacklevel argument can be used by wrapper
functions written in Python, like this:
def deprecation(message):
warnings.warn(message, DeprecationWarning, stacklevel=2)
This makes the warning refer to deprecation()‘s caller, rather than to the
source of deprecation() itself (since the latter would defeat the purpose
of the warning message).
-
warnings.warn_explicit(message, category, filename, lineno[, module[, registry[, module_globals]]])
This is a low-level interface to the functionality of warn(), passing in
explicitly the message, category, filename and line number, and optionally the
module name and the registry (which should be the __warningregistry__
dictionary of the module). The module name defaults to the filename with
.py stripped; if no registry is passed, the warning is never suppressed.
message must be a string and category a subclass of Warning or
message may be a Warning instance, in which case category will be
ignored.
module_globals, if supplied, should be the global namespace in use by the code
for which the warning is issued. (This argument is used to support displaying
source for modules found in zipfiles or other non-filesystem import
sources).
Changed in version 2.5: Added the module_globals parameter.
-
warnings.warnpy3k(message[, category[, stacklevel]])
- Issue a warning related to Python 3.x deprecation. Warnings are only shown
when Python is started with the -3 option. Like warn() message must
be a string and category a subclass of Warning. warnpy3k()
is using DeprecationWarning as default warning class.
-
warnings.showwarning(message, category, filename, lineno[, file[, line]])
Write a warning to a file. The default implementation calls
formatwarning(message, category, filename, lineno, line) and writes the
resulting string to file, which defaults to sys.stderr. You may replace
this function with an alternative implementation by assigning to
warnings.showwarning.
line is a line of source code to be included in the warning
message; if line is not supplied, showwarning() will
try to read the line specified by filename and lineno.
Changed in version 2.6: Added the line argument. Implementations that lack the new argument
will trigger a DeprecationWarning.
-
warnings.formatwarning(message, category, filename, lineno[, line])
Format a warning the standard way. This returns a string which may contain
embedded newlines and ends in a newline. line is
a line of source code to be included in the warning message; if line is not supplied,
formatwarning() will try to read the line specified by filename and lineno.
Changed in version 2.6: Added the line argument.
-
warnings.filterwarnings(action[, message[, category[, module[, lineno[, append]]]]])
- Insert an entry into the list of warnings filters. The entry is inserted at the
front by default; if append is true, it is inserted at the end. This checks
the types of the arguments, compiles the message and module regular expressions,
and inserts them as a tuple in the list of warnings filters. Entries closer to
the front of the list override entries later in the list, if both match a
particular warning. Omitted arguments default to a value that matches
everything.
-
warnings.simplefilter(action[, category[, lineno[, append]]])
- Insert a simple entry into the list of warnings filters. The meaning of the
function parameters is as for filterwarnings(), but regular expressions
are not needed as the filter inserted always matches any message in any module
as long as the category and line number match.
-
warnings.resetwarnings()
- Reset the warnings filter. This discards the effect of all previous calls to
filterwarnings(), including that of the -W command line options
and calls to simplefilter().
Available Context Managers
-
class warnings.catch_warnings([*, record=False, module=None])
A context manager that copies and, upon exit, restores the warnings filter
and the showwarning() function.
If the record argument is False (the default) the context manager
returns None on entry. If record is True, a list is
returned that is progressively populated with objects as seen by a custom
showwarning() function (which also suppresses output to sys.stdout).
Each object in the list has attributes with the same names as the arguments to
showwarning().
The module argument takes a module that will be used instead of the
module returned when you import warnings whose filter will be
protected. This argument exists primarily for testing the warnings
module itself.
Note
In Python 3.0, the arguments to the constructor for
catch_warnings are keyword-only arguments.
New in version 2.6.
|